Remove the nebuliser guide, mouthpiece and aerosol volume adjust knob from the cover.
•How to remove the delivery rate volume adjust knob: Rotate the knob counterclockwise, adjust the "
" mark with the matching mark "
" of the cover and pull it upwards.
Pour the medication out of the cup, clean and sterilise the cover, nebuliser guide, medication cup holder, mouthpiece, aerosol volume adjust knob, removable parts.
Drain water from the water tank. Wipe out remaining water with soft, dry cloth.
•Never use abrasive material on transducer.
•Be sure that the unit is disconnected from the power source before cleaning.
Replacing and cleaning of the air filter
Remove the aerosol volume adjust knob from the cover ➀, ➁ and remove the filter ➂.
40° C or less
English
Wash the air filter in lukewarm water (40° C or less) or with diluted neutral cleanser to reuse. After washing, make sure the filter is completely dry before attaching it to the unit.
•If soiling can no longer be washed out, replace the filter with a new air filter
Other parts
Wash the medication cup, medication cup holder, cover, nebuli- ser guide, mouthpiece, aerosol delivery rate adjust knob and fan in commercial cleaning solution (eg. Milton). Do not use soap.
All parts can be placed in boiling water for 5 to 10 minutes. Do not allow the water to boil dry.
Unit maintenance
Clean the unit using a cloth moistened with water and a few drops of neutral cleanser, and then wipe dry with a cloth.
• Never use benzene, thinner, a volatile chemical.
Storage
Do not store the unit in direct sunlight or in areas of high humidity. The unit should be kept in a safe place.
12 | 13 |