ResMed S8 Auto 25 Cleaning and Maintenance, Daily, Weekly, Monthly, Replacing the Air Filter

Page 14

Cleaning and Maintenance

You should regularly carry out the cleaning and maintenance described in this section. Refer to your mask and humidifier manuals for detailed instructions regarding the care of those devices.

Daily

Disconnect the air tubing and hang it in a clean, dry place until next use.

Weekly

1Remove the air tubing from the S8 device and the mask.

2Wash the air tubing in warm water using mild detergent.

3Rinse thoroughly, hang, and allow to dry.

4Before the next use, reconnect the air tubing to the air outlet and mask.

Monthly

1Clean the exterior of the S8 with a damp cloth and mild liquid soap.

2Check the air filter for holes and blockage by dirt or dust.

WARNING

!• Beware of electric shock. Do not immerse the unit or power cord in water. Always unplug the unit before cleaning and be sure it is dry before plugging back in.

The mask system and air tubing are subject to normal wear and tear. Inspect them regularly for damage.

Do not use bleach, chlorine, alcohol, or aromatic-based solutions, moisturising or antibacterial soaps or scented oils to clean the air tubing or the device. These solutions may cause hardening and reduce the life of the product.

Replacing the Air Filter

Replace the air filter every six months (or more often if necessary).

1Remove the air filter cover at the back of the S8 device.

English

Air filter cover

2Remove and discard the old air filter.

3Insert a new filter with the blue-tinted side facing out from the device.

4Replace the air filter cover.

Cleaning and Maintenance

11

Image 14
Contents User Guide S8 Auto Contents Contraindications IntroductionS8 Auto 25 System Adverse EffectsResScan Data Card MasksHumidifier Using the S8 Auto Setting up your S8How to Use the Control Panel Attaching a H4i HumidifierUsing the Menus How to Select the Mask Type SmartStartStarting Treatment Stopping TreatmentReminders on the S8 LCD Smart DataUsing the Data Card Copying Data onto a Data CardTraveling with the S8 Auto Weekly Cleaning and MaintenanceDaily MonthlyServicing Troubleshooting Problem/Possible Cause SolutionDisplays error message High LEAK!!! Adjust Mask Technical Specifications Symbols Which Appear On The Device General Warnings and CautionsGeneral Warnings and Cautions Separation distance according to frequency of transmitter m English Limited Warranty