How to Select the Mask Type
Scroll to MASK and select 
. Press you require. The following table shows the mask:
or 
until you see the setting setting that should be selected for each
Settings | Mask |
|
|
ULTRA | Ultra Mirage Nasal Mask |
| Ultra Mirage II Nasal Mask |
|
|
MIR FULL | Mirage Liberty Full Face Mask |
| Mirage Quattro Full Face Mask |
| Ultra Mirage Full Face Mask |
|
|
ACTIVA | Mirage Activa Nasal Mask |
|
|
SWIFT | Mirage Swift Nasal Pillows System |
| Mirage Swift II Nasal Pillows System |
| Swift LT Nasal Pillows System |
|
|
STANDARD | Mirage Vista Nasal Mask |
| Mirage Micro Nasal Mask |
|
|
MIRAGE | Mirage Nasal Mask |
|
|
How to change the EPR level (CPAP mode)
Expiratory Pressure Relief (EPR) can be used to help ease any discomfort you may experience when breathing out during treatment. If your clinician has allowed access you can change the EPR level. There are four settings: OFF; 1 (lowest EPR); 2; and 3 (highest EPR).
1On the standby (RAMP) screen, press 
.
2Press 
until you see EPR LEVEL, then press 
.
3Press 
or 
until you see the setting that you require.
4Press 
to save the setting.
How to change the Exhalation rate (VAuto mode)
If enabled by the clinician, you can adjust the Exhalation rate so that the rate of pressure drop is at a level that is most comfortable for you. There are three settings: Fast; Medium; and Slow.
1On the standby (SETTLE) screen, press 
.
2Press 
until you see EXHALATION, then press 
.
3Press 
or 
until you see the setting that you require.
4Press 
to save the setting.
SmartStart™
If your clinician has enabled SmartStart/Stop, your device will start automatically when you breathe into your mask and stop automatically when you take your mask off.
6