Reassembling the Mask
1 | 2 | 3 |
Insert the ports cap. | Insert the cushion into the |
| mask frame. Ensure that |
| the arrows at base of the |
| cushion and mask frame |
| are aligned. |
Push the forehead pads firmly into the forehead support.
4 | (a) | (c) | 5 |
|
| (b) |
|
Insert the forehead support (a) into the mask frame and screw (b) the dial clockwise onto the pole. Turn the dial until it clicks (c). Ensure the dial sits flush against the frame.
6 | 7 |
Insert the swivel into the end of the elbow.
Insert the assembled | Reattach the top headgear |
elbow into the mask frame. | straps by threading them |
| through the loops. |
6