Topcom BPM 2301b
9.4Memory
The BPM 2301b has two Memory zones. Each can store up to 30 measurements including the date and time
The main unit automatically stores the previous measured values.
Remove the batteries for more than 1 minute to erase the entire memory.
•Press the ‘POWER’ button to activate the display.
•Press ‘PAGE’ to select memory zone 
or 
.
•Press ‘MEMO’. The latest stored measurement result is displayed.
•Press the ‘MEMO’ button successively to read previous measurement results.
10 Setting date and time
The Date and time is displayed on top of the LCD panel.
To adjust the date and time:
•Press the ‘POWER’ button to activate the unit.
•Press ‘TIME’ at least 5 seconds, the ‘year’ blinks on the display.
•Press ‘MEMO’ to increase or ‘PAGE’ to decrease the “Year”.
•Press ‘TIME’ to confirm, the ‘month’ digits start blinking.
•Follow the same instructions as used for the year to change Month, Day, Hours and Minutes.
•After confirming the Minutes, you will leave the time setting menu.
•Press the ‘POWER’ button to deactivate the unit.
ENGLISH
61