SECTION
Attaching the Battery
WARNING
Ensure there is an audible click when installing the battery either on the battery charger or control box. Otherwise, injury or damage may occur.
NOTE: For this procedure, refer to FIGURE 2.3.
1.Install the battery into the control box and ensure there is an audible click (Detail “A”).
2.Ensure that the control box emergency push button is set to the Off (out) position (Detail “B”).
3.If the control box emergency push button is set to the On position, turn the button ¼ turn clockwise, and the button will pop out.
DETAIL “A”
DETAIL “B”
Battery
Control Box
Emergency Push
Button
FIGURE 2.3 Attaching the Battery
Reliant™ 440 | 14 | Part No 1141431 |