Invacare 440 manual Moving the Patient, Lifting the Patient

Page 22

SECTION 4—TRANSFERRING FROM

STEP 1A

STEP 1B

STEP 2E

STEP 2D

STEP 2C

Locking Lever

 

 

Rear Swivel

 

Caster

 

NOTE: Rear swivel caster

 

shown in unlocked position.

STEP 2A

STEP 2B

 

FIGURE 4.1 Lifting the Patient

Moving the Patient

WARNING

STANDING SLINGS - DO NOT use the standing sling in combination with the stand-up lift as a transport device. It is intended to transfer an individual from one resting surface to another (such as a bed to a wheelchair). Moving a person using the standing sling in combination with the stand-up lift over any distance is not recommended.

During transfer, with patient suspended in a sling attached to the lift, DO NOT roll stand-up lift over objects such as carpet, raised carpet bindings, door frames, or any uneven surfaces or obstacles that would create an imbalance of the stand-up lift and could cause the stand-up lift to tip over. Use push handle on the mast at all times to push or pull the stand-up lift.

NOTE: For this procedure, refer to FIGURE 4.2.

1.Using the push handle, slowly move the patient to the desired surface.

2.Refer to Transferring to on page 23 before lowering the patient onto the desired surface.

Push Handle

FIGURE 4.2 Moving the Patient

Reliant™ 440

22

Part No 1141431

Image 22
Contents Reliant Patient Lift Symbol Legend Accessories WarningTable of Contents Using the Patient Lift AS a Standing AID Special Notes MeaningLabel Location Typical Product Parameters Reliant 440 Patient LiftGeneral Guidelines Weight LimitationUsing the Sling Assembling the LiftOperating the Lift Lifting the PatientPerforming Maintenance Transferring the PatientAssembly Assembling the Patient LiftAssembling the Patient Lift Attaching the Kneepad Attaching the KneepadAttaching the Battery Attaching the BatteryMounting the Battery Charger Mounting the Battery ChargerOperating the Patient Lift OperationIntroduction Locking/Unlocking the Rear CastersRaising/Lowering the Patient Lift Using the Emergency StopClosing/Opening Leg Base Activating a Mechanical Emergency Release Primary Emergency ReleaseCharging the Battery Charging the BatteryTransferring from Lifting PreparationLifting the Patient Moving the Patient Lifting the PatientTransferring to Transferring Patient To WheelchairTransferring Patient to Bed Transferring Patient To WheelchairTransferring Patient to Bed Transferring Patient to Commode Using the Patient Lift AS a Standing AID Standing ProcedureDo not lift the patient Troubleshooting Symptoms Faults SolutionInspect/Adjust Initially MaintenanceSafety Inspection Checklists Institutional Inspect/Adjust MonthlyIn-Home Inspect/Adjust Every Six Months Cleaning the Sling and the Lift Care and Maintenance of Stand-Up LiftDetecting Wear and Damage This procedure Must be performed by a qualified technician Replacing Electric ActuatorMaintaining the Base Adjustment Replacing Electric ActuatorFront Caster Replacing the CastersRear Caster Limited Warranty USA