T9P new (6) 7/17/02 6:05 PM Page 13
HOW TO TAKE A READING
Instructions for special conditions:
[ | If your systolic pressure is known to |
| be more than 220 mmHg, push and |
| hold the START button until the |
| monitor inflates 30 to 40 mmHg |
| higher than your suspected systolic |
| pressure. |
| NOTE: Do not apply more |
| pressure than necessary. |
| The monitor will not inflate |
| above 300 mmHg. |
[ | If you want to stop the measurement, |
| |
| push the ON/OFF button. The monitor |
| will stop inflating and start deflating |
| rapidly, then the monitor will turn off. |
START
Continue to press button
13