HOW to Load Printer Paper

T9P new (6) 7/17/02 6:05 PM Page 16

1. Open printer cover in the direction indicated by the arrow symbol and remove paper roll from the main unit.

2. Peel off the glued edge of the printing paper included with the unit, and cut the first 10 cm with a pair of scissors.

3. Press the PAPER FEED button while inserting the edge of the printing paper into the paper feeding slot. When the edge of the paper protrudes sufficiently, release the PAPER FEED button.

4. Close the plastic printer cover. Make certain that the paper sticks out from the top when the cover is replaced.

5.Thermal sensitive paper is supplied with the unit. Use only thermal paper of similar size (width approx. 38mm)

and roll diameter (not to exceed approx. 26mm). These rolls of paper (model number HEM - PAPER - 759P) can be ordered from OMRON distributors.