HOW to USE the PRINTER-UNIT

T9P new (6) 7/17/02 6:05 PM Page 17

The T9P has the ability to print all the readings stored in memory.

NOTE:

[

Make sure printer-unit is connected to main unit (see How to Connect Printer-Unit)

Do not use printer-unit without loading printer paper (see How to Load Printer Paper). Improper use will decrease operation life cycle of printer-unit.

Main unit does NOT have to be ON to operate printer-unit.

[ Printer-unit will automatically shut OFF when printing is completed.

[ If you need to stop printing during printing process, press “DATA/STOP” button.

1. Press “DATA/STOP” to print measurement of most recent reading.

The numeric print-out will look like the following example:

Month/Date

Systolic Reading

Diastolic Reading

Pulse Reading

	7/9	6:36 AM

SYS

111mmHg

DIA 67mmHg PULSE 77/min

Time

2.Press “ALL DATA” button to print a numerical list and average of all stored readings (stores a maximum of 28 readings).