Omron Healthcare HEM-7211-E8, HEM-CR24 Taking a Reading, Press the O/I Start button

Page 10

3. Using the Unit

3.3Taking a Reading

Notes:

•To cancel a measurement, press the O/I START button to turn the unit off and to release the air in the arm cuff.

•Remain still while taking a measurement.

1.Press the O/I START button.

The cuff will start to inflate automatically.

START

Dual

Check

System

INFLATE DEFLATE END

COMPLETE

Cuff Wrapping Guide

If your systolic pressure is more than 220 mmHg

After the cuff starts to inflate, press and hold the O/I START button until the monitor inflates 30 to 40 mmHg higher than your expected systolic pressure.

Notes:

•The monitor will not inflate above 299 mmHg.

•Do not apply more pressure than necessary.

8

Image 10

Contents Model M6 Contents Important Safety Information General UsageImportant Safety Information Overview Main unitInstalling/Replacing Batteries PreparationSetting the Date and Time Press the O/I Start button to store the settingUsing the Unit Applying the Arm CuffHow to Sit Correctly Taking a Reading Press the O/I Start buttonDual Check System Using the Unit Using the Memory Function Press the button, while the average value is displayed Troubleshooting and Maintenance Icons and Error MessagesTroubleshooting and Maintenance Troubleshooting Problem Cause RemedyReplace the batteries with new Maintenance Calibration and ServiceStorage Do not store the unit in the following situationsOptional Parts Medium Arm Cuff Large Arm Cuff Small Arm Cuff AC Adapter STechnical Data Power SourceTechnical Data Technical Data Some Useful Information about Blood Pressure Why is it a Good Thing to measure Blood Pressure at Home? MmHg are assumed as hypotensive