Omron Healthcare HEM-7211-E8, HEM-CR24 instruction manual Setting the Date and Time

Page 7

2. Preparation

2.2Setting the Date and Time

1.Press the button.

2.Set the monitor to the correct date and time before taking a measurement for the first time.

1)	Push or	buttons to
	change.
2)	Push the	button to confirm.	Year	Month Day	Hour Minute
	Next setting appears.		Year
	Next setting appears.

EN

3. Press the O/I START button to store the setting.

Notes:

•If the batteries have been removed for 30 seconds or more, the date and time setting will need to be reset.

•If the date and time are not set, “-:--” appears during or after measurement.

5

Image 7

Contents Model M6 Contents General Usage Important Safety InformationImportant Safety Information Main unit OverviewPreparation Installing/Replacing BatteriesPress the O/I Start button to store the setting Setting the Date and TimeApplying the Arm Cuff Using the UnitHow to Sit Correctly Press the O/I Start button Taking a ReadingDual Check System Using the Unit Using the Memory Function Press the button, while the average value is displayed Icons and Error Messages Troubleshooting and MaintenanceTroubleshooting and Maintenance Problem Cause Remedy TroubleshootingReplace the batteries with new Calibration and Service MaintenanceDo not store the unit in the following situations StorageMedium Arm Cuff Large Arm Cuff Small Arm Cuff AC Adapter S Optional PartsPower Source Technical DataTechnical Data Technical Data Some Useful Information about Blood Pressure Why is it a Good Thing to measure Blood Pressure at Home? MmHg are assumed as hypotensive