HOW TO TAKE A READING
Instructions for special conditions:
•If your systolic pressure is known to be more than 220 mmHg, push and hold the START button until the monitor inflates 30 to 40 mmHg higher than your suspected systolic pressure.
NOTE: Do not apply more pressure than necessary.
The monitor will not inflate above 300 mmHg.
• If you want to stop the |
|
measurement, push the ON/OFF |
|
button. The monitor will stop | START |
inflating and start deflating | |
rapidly, then the monitor will |
|
power off. |
|
| Continue to press button |
HOW TO USE THE MEMORY FUNCTION
This monitor has a memory capable of storing fourteen sets of readings. Every time you complete the measurement, the monitor automatically stores blood pressure and pulse rate.
•Push the 
button to recall stored readings while the Heart Symbol ( 
) is displayed.
•When the memory is holding fourteen sets of readings, the oldest set will be deleted to store a new set.
Last reading
Value before | Value of fourteen |
the last reading | readings before |
•To delete stored readings, press the 
button and the Start button at once, then all the readings will be deleted.
NOTE: You can not delete the stored readings partially.
START
Press these two buttons | Display of memory deletion |
at the same time. |
|
12 | 13 |