HOW TO USE THE OPTIONAL AC ADAPTER
(ACCESSORY ITEM SOLD SEPARATELY)
To avoid potential damage to the monitor, use only the exclusive AC adapter (Model
Omron Healthcare, Inc.
300 Lakeview Parkway
Vernon Hills, IL 60061
Toll Free Phone #:
To connect AC adapter
1. Insert the AC adapter plug 
Plug into the jack on the side of the
monitor.
2. Insert the AC adapter plug
into a 120V AC outlet (50 - 60
cycles).Jack
Option AC Adapter
To remove the AC adapter
To remove the AC adapter, disconnect the adapter plug from the AC outlet first and then disconnect the cord from the monitor’s jack.
NOTE: The monitor is designed not to draw power from the batteries when the AC adapter is in use.
TROUBLESHOOTING
Error Indicator | Cause | Correction |
| Cuff | Turn monitor off, wait |
| and take another measurement. | |
|
| |
|
| Repeat steps listed under "How to |
|
| Take a Reading." If "EE" is displayed |
|
| again, take another measurement |
|
| |
|
| by pressing and holding the START |
| Movement during | button as instruction page 12 under |
| "How to Take a Reading", instructions | |
| measurement. | for special conditions. |
Cuff | Turn the monitor off, carefully read | |
and repeat steps listed under "How | ||
300 mmHg). | ||
to Take a Reading." | ||
|
Battery voltage is excessively | Replace all four "AA" batteries with |
low. | new batteries. |
Problem caused by abnormal | Contact OMRON Customer Service |
memory function. | Toll Free |
If you continue to have difficulty obtaining a reading, call
OMRON HEALTHCARE CUSTOMER SERVICE TOLL FREE
Please tell the representative you have an OMRON Model
14 | 15 |