HOW TO TAKE A READING
Read and follow directions in "Suggestions Before Measuring Blood Pressure" and "How To Apply The Wrist Cuff" before taking a reading.
HOW TO TAKE A READING
b) If during your measurement (deflation) the |
monitor determines that a higher pressure |
value is required, it will momentarily stop |
deflation and automatically increase the |
1. Press the ON/OFF Button. | |
a) | All the display symbols appear |
| for approximately one second. |
| This is the initial LCD test. |
b) | The display symbols disappear |
SYSTOLIC mm Hg
DIASTOLIC mm Hg PULSE/min
SYSTOLIC mm Hg
pressure value to 230 mmHg. |
c) To inflate higher than 230 mm Hg, during |
deflation press and hold the START button |
until the necessary pressure value is reached. |
DO NOT INFLATE HIGHER THAN 280 mmHg. |
and the Deflation Indication |
Symbol ( | ➧ ) starts to flash. |
c) When the monitor completes the necessary preparations before measurement, the Heart Symbol (♥) appears with a zero.
DIASTOLIC mm Hg PULSE/min
SYSTOLIC mm Hg
DIASTOLIC mm Hg PULSE/min
3.When the cuff reaches your correct inflation level, it begins to deflate automatically.
As the cuff deflates, decreasing numbers
appear on the display. The Heart Symbol (♥) flashes at every heart.
4.The monitor exhausts the residual air when the
measurement is complete. The Heart Symbol (♥) stops flashing and your blood pressure
and pulse rate display alternately.
SYSTOLIC mm Hg
DIASTOLIC mm Hg PULSE/min
SYSTOLIC mm Hg
DIASTOLIC mm Hg PULSE/min
SYSTOLIC mm Hg
DIASTOLIC mm Hg PULSE/min
2.Hold the unit at your heart level and press the START button. The cuff automatically inflates to approximately 180 mm Hg.
a) Keep the unit at the heart level until the measurement is completed.
NOTE: Wait
to normal. You may require more rest time between readings depending on your individual physiological characteristics.
Remember To Keep A Record Of Your Blood Pressure And Pulse Measurements.
8 | 9 |