KNOWTITLEYOUR UNIT
Lens
Probe
Button Lens
Display
IntelliTemp™
Probe
Lens cover | Box with 21 lens covers |
| Storage case |
CONVERSION FAHRENHEIT TO CENTIGRADE
(°F/°C)
The thermometer is initially set at Fahrenheit ˚F.
1.In the off position with lens cover applied, press and hold the button for three (3) seconds until the “˚F” flashes you will hear one beep.
2.Press button again, the “˚C” flashes.
3.After five (5) seconds the unit will turn off. The desired mode
has been set. Repeat the process to reverse measurement scale if desired.
NOTE: Changing the measurement scale deletes the previous measured value.
6