HoMedics BPW-260 manual Installing Batteries, Alkaline LR03 AAA size

Page 8

INSTALLING BATTERIES

1.The battery cover is located along the bottom side of the monitor. Remove battery cover by pressing down and pulling away from the monitor.

2.Install batteries according to the polarity indications inside the compartment (as shown in figure 2). Battery Type: 2

Alkaline LR03 (AAA) size

3.Insert the other battery, according to the polarity indications inside the compartment (as shown in figure 3).

4.Replace the cover by inserting it back into place.

13

BPW-260_A.indd 13-14

1.

2.

3.

4.

Replace the batteries if:

1.The weak battery symbol appears on the display.

2.Nothing appears on the display when the power is switched on.

As the supplied batteries are for test only, they may be discharged earlier than batteries you buy in stores. Replace all batteries at one time (as simultaneous set). Use only 1.5V AAA alkaline batteries. Remove batteries when unit is not in use for extended periods of time. Date and time will need to be reset if batteries are removed or replaced. Clean contacts on battery and in battery compartment with a soft dry cloth each time you install batteries.

Note: Batteries are hazardous waste. Do not dispose of them together with the household garbage.

14

12/7/09 4:48 PM

Image 8

Contents Automatic Wrist Blood Pressure Monitor With Voice Assist Table of Contents Important Product Notices and Safety Instructions About Blood Pressure Blood Pressure Standard NAME/FUNCTION of Each Part For more information on the Irregular Heartbeat DetectorDisplay Symbols Display ExplanationsInstalling Batteries Alkaline LR03 AAA sizeDate & Time SET Procedure Using the Voice Assist Talking FunctionSetting the Language Applying the Cuff Correct Measurement PostureMeasurement Procedure Important NotesStart Stop Risk Category Index Irregular Heartbeat Detector IHB Recalling Values from MemoryClearing Values from Memory Important Notes Regarding Your Blood Pressure Measurement CARE, Maintenance & Cleaning Troubleshooting Potential for Electromagnetic InterferenceSpecifications SpecificationsDistributed by BPW-260 Información DE USO ÍndiceInformación Inicial Avisos Importantes DEL Producto E Instrucciones DE Seguridad Sobre LA Presión Sanguínea Estándar DE Presión Sanguínea NOMBRE/FUNCIÓN DE Cada Pieza Accesorios para la unidadExplicaciones DE LA Pantalla Presión Sistólica Diastólica Pulso Indicador de fecha/horaInstalación DE LAS Pilas Pila 2 pilas alcalinas LR03 Tamaño AAAProcedimiento DE Configuración DE Fecha Y Hora USO DE LA Función DE Hablar Voice AssistCómo configurar el idioma Aplicación DEL BrazaletePostura Correcta Para LA Medición Procedimiento DE MediciónStart Stop Nota Índice DE Categoría DE Riesgo Cómo Recuperar LOS Valores DE LA Memoria Información ImportanteCómo Borrar LOS Valores DE LA Memoria BPW-260A.indd CUIDADO, Mantenimiento Y Limpieza Diagnóstico Y Resolución DE Problemas Potencial DE Interferencia CON RADIO/TELEVISIÓNDimensiones Especificaciones