CARE & CLEANING
•Switch off the power supply before cleaning.
•Do not touch the aluminium fin, sharp part may cause injury.
CAUTION
WASHING INSTRUCTIONS | HINTS | |
• Do not use benzene, thinner or scouring powder. | • Clean the filter regularly for best performance and to | |
• Use only soap ( pH7) or neutral household detergent. | reduce power consumption. | |
• Please consult your nearest dealer for seasonal | ||
• Do not use water hotter than 40°C. | ||
inspection. | ||
| ||
ALUMINIUM FIN | FRONT PANEL | |
| ||
| Raise and pull to remove. Wash | |
| gently and dry. |
Remove |
INDOOR UNIT
Wipe the unit gently with a soft, dry cloth.
ACTIVE e-ion GENERATOR
e-ion FILTERS
•Clean the filters regularly.
•Wash/rinse the filters gently with water to avoid damage to the filter surface.
•Dry the filters thoroughly under the shade, away from fire or direct sunlight.
•Replace any damage filter.
ACTIVE
Clean with dry cotton bud.
•Active
6
FOR SEASONAL INSPECTION AFTER EXTENDED NON-USE
•Checking of remote control batteries.
•No obstruction at air inlet and air outlet vents.
•After 15 minutes of operation, it is normal to have the following temperature difference between air inlet and air outlet vents:
Cooling: ≥ 8°C | Heating: ≥ 14°C |
FOR EXTENDED NON-USE
•Activate heat mode for 2~3 hours to thoroughly dry the unit.
•Turn off the power supply.
•Remove the remote control batteries.
NON SERVICEABLE CRITERIAS
TURN OFF POWER SUPPLY then CALL Authorized Distributor under the following conditions:
•Abnormal noise during operation.
•Water/foreign particles have entered the remote control.
•Water leaks from Indoor unit.
•Circuit breaker switches off frequently.
•Power cord becomes unnaturally warm.
•Switches or buttons are not functioning properly.