Storing, recalling, and erasing
measurement data
•Storing data
*After each measurement, the systolic and diastolic rates, pulse rate and the time & date will be automatically stored. The memory holds data for the latest 60 measurements in each of 2 memory zones. If more than 60 measurements are entered, the memory will automatically clear out the oldest data.
•Recalling data
*Press the " " or " " button to select the memory zone. *Press the "MEMORY" button to get your stored memory data. If there is no data in the memory nothing will appear.
*If there is data in the memory, the first reading 
will be an average of the last three recorded set 
of measurements (systolic and diastolic pressure 
and pulse rate).
*Press the "MEMORY" button again and the lat- 
est recorded set of measurements will appear 
along with the recording time and date.
*Press the " " button to read the next set of stored data. The data displayed starts with the most recent reading and continues backwards to the oldest.
Storing, recalling, and erasing measurement data | 19 |