Setting Date, Time and Levels

Setting date and time

a. Press "MODE" button ("month" starts flashing)

Press "[	]" and "[	]" button to set and adjust the correct
month (1, 2, 3 ....12)
b. Press "MODE" button again ("date" starts flashing)
Press "[	]" and "[	]" button to set and adjust the correct
date
c. Press "MODE" button again ("hour" starts flashing)
Press "[	]" and "[	]" button to set and adjust the correct

hour in 12-hour format. A "PM" will appear for PM and dis- appear for AM.

d. Press "MODE" button again ("minute" starts flashing)

Press "[ ]" and "[ ]" button to set and adjust the correct minute (00, 01, 02 ...59)

If the batteries have run down or are removed or the adapter has been unplugged, the time and date will have to be reset.

After setting the minute you will automatically be prompted to set the personalized level for Memory Zone 1. The storage of 240 memory readings is divided into 3 memory zones, each maintaining up to 80 memory readings. The following explains how to set your personalized level in each zone.

Your personalized level should be decided between you and your healthcare provider.

Before setting your levels it is important to know: *Your systolic rate is set between 70 and 250 mmHg. *Your diastolic rate is set is between 40 and 115 mmHg.

16Setting Date, Time and Levels

Setting Date, Time and Levels

Setting personalized levels

a. Press "MODE" button

(" - - " will flash for 1st systolic self-management) Press " " or " " button to set/adjust the personalized systolic rate

b. Press "MODE" button

(" - - " will flash for 1st diastolic self-management) Press " " or " " button to set/adjust the personalized diastolic rate

c. Press "MODE" button

(" - - " will flash for 2nd systolic self-management) Press " " or " " button to set/adjust the personalized systolic rate

d. Press "MODE" button

(" - - " will flash for 2nd diastolic self-management) Press " " or " " button to set/adjust the personalized diastolic rate

e. Press "MODE" button

(" - - " will flash for 3rd systolic self-management) Press " " or " " button to set/adjust the personalized systolic rate

f.Press "MODE" button

(" - - " will flash for 3rd diastolic self-management)

Press " " or " " button to set/adjust the personalized diastolic rate

The examples above illustrate setting personalized levels in all 3 zones. After setting your Personalized Alert Level, you will automati- cally be given the option to set a Multi-Measurement for that zone. If you choose not to set a Multi-Measurement, just enter 1. After enter- ing these settings you will be returned to the Rest mode and can take

a measurement by pressing START/STOP.

Setting Date, Time and Levels 17