Storing, recalling, and erasing
measurement data
•Storing data
*After each measurement, the systolic and diastolic rates, pulse rate and the time & date will be automatically stored. The memo- ry holds data for the latest 80 measurements in each of 3 memory zones. If more than 80 measurements are entered, the memory will automatically clear out the oldest data.
•Recalling data
*Press the " " or " " button to select the memory zone.
*Press the "MEM" button to get your stored memory data. If there is no data in the memory nothing will appear.
*If there is data in the memory, the first reading will be 
an average of the last three recorded set of measure- 
ments (systolic and diastolic pressure and pulse rate). 
*Press the "MEM" button again and the latest recorded 
set of measurements will appear along with the record- 
ing time and date.
*Press the " " button to read the next set of stored data. The data displayed starts with the most recent reading and continues back- wards to the oldest.
*If your memory readings are out of range of your preset personal Alert levels. They will flash or show SMILING FACE symbol as explained on the previous page.
*No Irregular Heartbeat Detector Record will be stored in memory.
Storing, recalling, and erasing
measurement data
•Erasing data
*Press "MEM" into Memory mode.
*Press and hold on "MODE" button and then press " " button, the
3 Zones of 80 Memory
When you take a measurement, the monitor automatically stores it in memory space number one. As you continue to take measurements, the monitor will push the previous measurement back one space. In other words, the value in space one will always be the most recent blood pres- sure measurement taken.
Your monitor features a 3 party memory capability or 3 "zones" - each zone stores 80 measurements each for a total capacity of 240 measure- ments. This feature is useful for a user to track their blood pressure throughout the various periods of the day: morning, afternoon, and night. Press the " " button to toggle between memory zone No.1, 2, and 3. Once you select a zone that you want to view the measurements in, press the "MEM" button once to view the most recent measurement along with the time and date that it was taken. Press the "MEM" button again in succession and you will see all of the measurements registered to that zone. You can then press the " " button to switch to the next zone to view measurements. The monitor will automatically power off after about one minute of inactivity.
*When taking measurements, be sure and select the correct zone number using the SET button so that the measurement is registered to the appropriate zone.
20 Storing, recalling, and erasing measurement data | Storing, recalling, and erasing measurement data/3 Zones of 40 Memory | 21 |