![](/images/new-backgrounds/1294703/29470321x1.webp)
Pile side material
Sewn hook material
4.Using the Monitor
4. Using the Monitor
4.1Applying the Arm Cuff
You can wrap the cuff either on your right or left arm.
•Remove
• Do not place the cuff over thick clothes and do not roll up your sleeve if it is too tight.
1. If the cuff is assembled correctly, the hook material will be on the outside of the cuff loop and the metal
Note: If the cuff is not assembled,
pass the end of the cuff fur- thest from the tubing through
the metal
2.Insert the air plug into the air jack (on the left side of the device).
Air plug
EN |
Air jack
The cuff must be fully deflated when it is inserted into the air jack.
11