3.Preparation
3.2Setting the Date and Time
Your blood pressure monitor automatically stores up to 90 measurements values in its memory and calculates an average reading based on the measurements from the last three read- ings.
•Set the monitor to the correct date and time before taking a measurement for the first time.
•If the batteries have been removed for a long period of time, the date and time setting will need to be reset.
1. When the batteries are installed, the year digits will flash in the display when you turn on the monitor.
Note: If you need to reset the date and time for some reason,
hold down the | button while the power is off. |
2. Press the 
button to advance the digits one at a time.
To change the digits to a lower
number, press the 
button to lower the digits one at a time.
If you hold down the 
or 
button, the digits will advance (or lower) rapidly.
3. Press the 
button to confirm the setting when the desired number appears on the display.
EN |
9