Omega Engineering OS524E, OS534E, OS530HRE Parts of the Thermometer, Taking Temperature Readings

Page 2

START HERE

Using this Quick Start Manual

Use this Quick Start Manual with your OS530E/ OS520E series Handheld Infrared Thermometer to set up and perform basic operations. These tasks are:

Installing the Batteries

Operating the Laser Sight

Taking Temperature Readings

Measuring Distance

For detailed information, refer to the

User’s Guide (M4088).

Getting Started

Parts of the Thermometer

Digital/Video Camera (Optional)

23

OMEGASCOPE®

LCK HAL LOBAT

ATC LAL PRN °F °C

Laser

Power

Switch

®

FUNC LOCK

F

C

Figure 3. Display and Keypad View

4

2 Types of Laser Beams

Laser Dot

Laser Circle

Figure 5. Two Laser Configurations

The thermometer is ready for operation.

Taking Temperature Readings

1.Aim at the target. If you are not using the Laser Sighting, use the “V” groove on top of the thermometer to align the target to the thermometer’s field of view.

Field of View

“V” Groove

Lens Rubber Boot

Display

Rubber

Boot

Installing the Batteries

Invert the unit and install 4 fresh AA size batteries as shown in Figure 4.

Laser

Beam

Aperture

Target

(ACCEPTABLE) (UNACCEPTABLE)

Figure 6. Field of View Positions

2. Pull and hold the trigger. To use the laser

sighting, set the laser power switch to the ON

Built-in

Backlit

Distance Module

LCD

(Optional)

 

Distance

Power

Switch

Trigger

Battery

Compartment

Door

Wrist

TripodStrap

Mount

Figure 1. OS530E/OS520E Series Handheld Infrared

Thermometer Front View

Laser

Dot/Circle

Switch

Thermocouple Input Socket (SMP) (standard on OS532E, OS533E, OS534E)

ac Adapter Input Jack

Analog Output Jack (1mV/deg)

RS-232 Phone Jack (standard on OS533E, OS534E, OS523E, OS524E)

Figure 2. OS530E/OS520E Series Handheld Infrared

Thermometer Various Views

Figure 4. Installing the Batteries

Operating the Laser Sight Function

WARNING: DO NOT AIM THE LASER BEAM AT

ANYONE’S EYES.

CAUTION: Use of controls or adjustments or performance of procedures other than those specified here may result in hazardous radiation exposure. Refer to the Operator’s Manual for complete warnings and cautions.

position. The Power Indicator LED and the laser

beam will turn on. The laser beam will stay on as

long as the trigger is pulled. The target

temperature and emissivity (E) will be displayed

on the LCD. You can press the

and C F

key to increment or decrement the target

emissivity. The laser beam is switchable between

dot and circle using the switch on the right side.

Measuring Distance

Distance measurement is offered either as field mountable or built-in. The field mountable version

(HH-DM) is a stand alone device. Press the key to measure distance. The build-in version (-DM) is an integral part of the thermometer. Go to the d_F or d_M display menu. Set the power switch on the distance module to the ON position. Pull the trigger for about 2 seconds. The upper display will show the distance in feet or meters. Releasing the trigger will turn off distance measurement.

Image 2
Contents OS530LE Parts of the Thermometer Taking Temperature ReadingsInstalling the Batteries Operating the Laser Sight Function