Notes | General Description | |
The OMEGA® | ||
| ||
| ||
| and an internal screw adjustment which provides continuous switch point | |
| adjustment while in operation | |
| with each unit to provide incremental switch point adjustment. Their non- | |
| magnetic design makes them ideal for applications where rust is a problem. | |
| The | |
| Series is also available in a special PPS* Hastelloy C and Viton construction. | |
| The | |
| such as sewage, machine cutting oils and medium slurries. The standard | |
| models can be used in mildly corrosive liquids such as low to medium | |
| concentration acids and bases; sea water, sewage oils; rusty coolant water, | |
| etc. The special PPS* Hastelloy C and Viton construction models are for | |
| use in concentrated corrosive liquids such as sulfuric, nitric, hydrochloric | |
| and acetic acids; ferric chloride; aqueous ammonia; benzene; magnesium | |
| chloride, etc. | |
| Particle contamination resistance is provided by a flexible filter boot | |
| which prevents crystallization, caking, heavy dirt concentration, slurries, | |
| scum, etc., from affecting the operation of the flow detector. The | |
| Series Switches respond to flow only, independent of line pressure, | |
| temperature and environment. | |
| During emergency conditions these switches signal catastrophic system | |
| failures such as line breakage; pump failure; incorrect valve opening or | |
| closing; pipe, valve or filter clogging, etc. |
Specifications
FLOW RANGE (water calibrated @ 70˚F)
The maximum flow range flexibility is provided by three adjustment options:
1. Continuous adjustment while operating via a calibrated FORCE/BALANCE spring.
2. Step incremental adjustment via drag disk size change.
3. Continuous adjustment via moment arm change.
12 | 1 |