Citizen refch-60-2b Description of Display Marks, CONDITION/CAUSE Corrective Action

Page 10

DESCRIPTION OF DISPLAY MARKS

DISPLAY MARK	CONDITION/CAUSE	CORRECTIVE ACTION

	Measurement is begun, but the pressure was insufficient.	Repeat measurement again.

	Appears when the blood pressure could not be measured accu-
	rately.
	(Some noises were detected by the movement of arm during	Repeat measurement again.
	measurement).	Repeat measurement again.
	measurement).
		First, exhaust air from the cuff, reapply the cuff prop-
		First, exhaust air from the cuff, reapply the cuff prop-
		erly and remeasure.
		Repeat measurement again.

Appears when the pulse could not be measured.

BT

Appears when the batteries become weak.

Replace the batteries.

Device has a trouble.

Ask purchased shop.

- Eng 10 -

Image 10

Contents REF CH-602B Identification of PartsSpecifications Cleaning Method of CuffGeneral Remarks on blood pressure measurement General RemarksFor proper measurement of blood pressure Precaution for USE and Maintenance Installing the Batteries Turn Power On MeasurementsAttaching of Wrist Cuff Open the wrist cuff as the figureTo Start the Measurement Automatic Power Off Function Turn Power OffSubsequent Measurements Description of Display Marks CONDITION/CAUSE Corrective ActionConsumer Electronics Division