Citizen refch-60-2b instruction manual Attaching of Wrist Cuff, Open the wrist cuff as the figure

Page 7

SYSTOLICmmHg

DIASTOLICmmHg

PULSE/min

After three short buzzer beeps, the “0” appears on the display. Then, ready for measurement.

2. Attaching of Wrist Cuff

Wrist cuff

Open the wrist cuff as the figure.

Turn left hand palm upwards and wrap the cuff around the wrist so that the display is placed on the side of palm.

Wrap the wrist cuff on bare skin. Wrist circumference: 13.5 ~ 19.5cm

- Eng 7 -

Wrist edge

Place the wrist cuff at the 1cm from the wrist edge.

Wrap the cuff around your wrist securely.

Wrap the cuff around your wrist securely so that there is no space between the wrist and cuff with the edge of wrist cuff pulled.

Fold up the rest of unused wrist cuff.

English

Image 7
Contents Identification of Parts REF CH-602BCleaning Method of Cuff SpecificationsGeneral Remarks on blood pressure measurement General RemarksFor proper measurement of blood pressure Precaution for USE and Maintenance Installing the Batteries Measurements Turn Power OnOpen the wrist cuff as the figure Attaching of Wrist CuffTo Start the Measurement Automatic Power Off Function Turn Power OffSubsequent Measurements CONDITION/CAUSE Corrective Action Description of Display MarksConsumer Electronics Division