Place your elbow on a table so that the palm is turned upwards and the cuff center is as high as your heart. Relax your entire body.
3. To Start the Measurement
SYSTOLIC mmHg
DIASTOLIC mmHg | START |
| ER |
PULS/min | W |
| PO |
Press the “START” switch.
The unit is inflated when the “START” switch is pressed.
SYSTOLICmmHg | SYSTOLICmmHg |
DIASTOLICmmHg | DIASTOLICmmHg |
PULSE/min | PULSE/min |
| SYSTOLICmmHg |
| DIASTOLICmmHg |
| PULSE/min |
When inflation is completed, the automatically exhaust mecha- nism will gradually deflate the pressure in the “wrist cuff”, and the mark “Q” will appear indicating that measurement is in progress.
When a pulse is detected, the pressure value moves to the lower side of the display. At this time the mark “Q” flashes and buzzer beeps.
If the inflation is insufficient at a pressure of 180mmHg, the reinflation is automatically made to a pressure of 210, 240, and 280mmHg until inflation is suitable for measurement. This unit cannot be inflated over a pressure of 280mmHg.
- Eng 8 -