Oregon Scientific BPW129 user manual Problem Symptom Check this Remedy

EN

Problem	Symptom	Check this		Remedy
No power	Display is dim	Batteries are	Replace with
	or will not light	exhausted.	new batteries
	up.		(	6).
		Batteries are	Insert the
		inserted	batteries
		incorrectly.	correctly(		6).
Low	shows on	Batteries are	Replace with
batteries	the display.	low.	new batteries
			(	6).
Error	shows on	A	Relax for a
message	the display.	measurement	moment and
		error	then measure
		occurred.	again.
	1, 2, or 3	The wrist	Refasten the
	shows on the	cuff is not	cuff and then
	display.	secure.	measure
			again (		7).
	4 shows	The monitor	Movement
	on the display.	detected	can affect the
		motion	measurement.
		while	Relax for a
		measuring	moment and
			then
			measure
			again.
	5 shows	Pressure	Relax for a
	on the display.	is over	moment and
		280mmHg	then measure
		(37.3 kPa)	again.

Problem	Symptom	Check this		Remedy
Error	6 shows	Deflation	Movement can
message	on the	period was	affect the
	display.	too long	measurement.
			Relax for a
			moment and then
			measure again.
	7 or 8	A calibration	Retake the
	shows on	error	measurement. If
	the display.	occurred	the problem
			persists, contact
			the retailer or our
			customer service
			department for
			further
			assistance. Refer
			to the warranty
			for contact
			information and
			return
			instructions.
Settings	Date and	The clock	Reset the clock
are wrong	time are	was not set	(	6).
	incorrect.	or reset after
		installing new
		batteries.
	Measurement	The	Reset the
	unit (mmHg	measurement	measurement
	or kPa) are	unit was not	unit
	incorrect.	set or reset	(	6).
		after installing
		new batteries.

10