Safety and Care Instructions

	Mean arterial	The average blood pressure
	pressure	measured (for more
		information, see page 4, “What
		is Mean Arterial Pressure?”).

	Pulse	Pulse rate per minute.

	Millimeter(s)	Measurement unit
	of mercury	for blood pressure

	Kilopascal	Measurement unit
		for blood pressure

	Memory	If “MEM” shows, the displayed
		measurement value is from the
		memory, and not necessarily
		from the last reading.

	Weak battery	Batteries are low and need
		to be replaced.

	Inflating	Unit is inflating with air to
		obtain the needed level of
		pressure.

	Deflating	Wrist cuff air is exhausting,
		or deflating.

NOTE: The arrow on the left side of the LCD display
indicates the type of measurement taken and its unit (for
example, MAP measured in mmHg, or SYS/DIA measured
in kPa)	3
	3

Safety precautions

Please observe the following safety precautions when setting up and using your blood pressure monitor.

·This device is intended for adult use only.

·This device is intended for non-invasive measuring and monitoring of arterial blood pressure. It is not intended for use on extremities other than the wrist or for functions other than obtaining a blood pressure measurement.

·Do not confuse self-monitoring with self-diagnosis. This unit allows you to monitor your blood pressure. Do not begin or end medical treatment based solely on the measurements of this device. Consult a physician for treatment advice.

·If you are taking medication, consult your physician to determine the most appropriate time to measure your blood pressure. Never change a prescribed medication without consulting your physician.

·This unit is not suitable for continuous monitoring during medical emergencies or operations.

·If the cuff pressure exceeds 300mmHg, the unit will automatically deflate. Should the cuff not deflate when pressures exceeds 300mmHg, detach the cuff from the wrist and press the ON button to stop inflation.

·To avoid measurement errors, carefully read this manual before using the product.