A&D UA-787 manual ? What Display Symbols Mean, Display Condition/Cause Recommended Symbol Action

?WHAT DISPLAY SYMBOLS MEAN

Display	Condition/Cause	Recommended
Symbol		Action
	The symbol shown while meas-	Measurement is in progress,
	urement is in progress. It blinks	remain as still as possible.
	while detecting the pulse.
	An irregular heartbeat or body	Take measurement again and
	movement may have occurred.	consult with your physician.
	Refer to page E-11 for more infor-
	mation on irregular heartbeats.
	Previous measurement stored in
	MEMORY.
	The battery power indicator dur-	Replace all batteries with new
Battery Full	ing measurement.	ones when the symbol blinks.
	The batteries are low when it	Alkaline batteries recommended.
Battery Low	blinks.
	Unstable blood pressure due to	Try the measurement again.
	excessive body movement.	Remain very still during the
		measurement.
	The systolic and diastolic values	Fasten the cuff correctly, and try
	are within 10 mmHg of each	the measurement again.
	other.
	The pressure value did not	Check for air leaks along the
	increase during inflation.	tube and around the
		air socket.
	The cuff is not fastened correctly.	Refasten the cuff and retake
		measurement.
	There is an air leak in the cuff or	Make sure tube is properly con-
	monitor.	nected to cuff and monitor.
	The pulse is not detected correctly.	Try the measurement again.
PULSE DISPLAY ERROR		Remain very still during
		the measurement.
	Cuff Inflation Meter	Measurement is in progress,
		remain as still as possible.
	Pressure Rating Indicator™	Refer to the section “About
		Pressure Rating Indicator” for
		further explanation.

E-2 ? LifeSource Health Line (Toll-Free): 1-888-726-9966