![](/images/new-backgrounds/1137724/13772427x1.webp)
English
ATTACHING THE ARM CUFF
1Unroll the arm cuff.
• Unroll the arm cuff and thread the end | Metal hoop |
| |
through the metal hoop so that the | Velcro patch |
side with the Velcro patch is on the |
|
outside. |
|
2Put the arm cuff around your arm so that the air hose is to the left of your palm.
• The arm cuff should be put directly against your skin but can also be used over a lightweight sleeve.
•If you are wearing a thick top, remove it. Do not roll up your sleeve as this may compress your upper arm and result in incorrect measurements.
3Adjust the position of the arm cuff so that the air hose is located in the center of your arm and the hem of the cuff is 2 to 3 cm above your elbow.
2~3 cm
Air hose