English
SETTING THE CLOCK
1Initial state. (When you load the batteries in the unit for the first time, carry out the reset procedure.)
• Date/Time setting when the batteries are fi rst loaded into the unit.
Date and time: January 1 12:00
2Setting the Month, Date and Time:
The current time and date should be set in the order written below.
•Each time you press the “MODE” switch, the data item to be modifi ed changes in the sequence shown below. The selected item fl ashes on and off.
1) Month s2) Day s3) Hour s4) Minute
•Press the “SET” switch to increase the setting by 1. Hold down the “SET” switch on to advance the setting continuously.
•Press the “MODE” switch to set each correct number.
3Correcting the Month, Date and Time of the clock
1.Press “MODE” switch. ( “month” starts fl ashing.)
Press “SET” switch to set the correct month. (1,2,3,.….12.)
2.Press “MODE” switch again. ( “date” starts fl ashing.) Press “SET” switch to set the correct date. (1,2,3,.….31.)
3.Press “MODE” switch again. ( “hour” starts fl ashing.)
Press “SET” switch to set the correct hour in
4.Press “MODE” switch again. ( “minute” starts fl ashing.) Press “SET” switch to set the correct minute (0,1,2,3,…..59.)
5.Press “MODE” switch again to switch to normal time.
(month: 7, date: 7, hour: 12 (PM),
minute: 38 appear on the display as shown on the right diagram.)
6.Device is now ready to start.
Date/Time display
P: PM mark