Citizen Systems REF CH-311B HOW to Unload the Batteries, Points for Accurate Measurement

Page 6

HOW TO UNLOAD THE BATTERIES

1 Open the battery compartment cover.

(

See page 9 "HOW TO LOAD

BATTERIES".)

2 Remove the batteries.

POINTS FOR ACCURATE MEASUREMENT

Blood pressure varies with posture, the time of day or numerous other factors. It is recommended to measure blood pressure at the same time each day in the same posture.

Measurement in sitting posture

1Place your arm on a table or similar surface stretching out the portion from the elbow to the hand.

2It is important to have the arm cuff level to your heart.

3 Lightly open your hand on the table with palm up and relax your fingers.

4 Do not move your body or talk during measurement.

English

3 Close the battery compartment cover.

Replacing the batteries

Replace the batteries with two new "AAA" batteries when appears on the display, or when nothing appears on the display when the POWER

switch is pressed.

The memory is erased if the batteries are removed for replacement, etc. and a record should be kept of any necessary data.

Do not use the alkaline dry battery and manganese dry battery together.

The batteries provided with the unit power the monitor. They may not last as long as indicated.

Dispose of used batteries properly in accordance with local regulations.

Measurement in laying posture

* Relax yourself not to apply pressure to the arm cuff.

1Lie down your head facing the ceiling.

2Lightly open your hand with palm up and straighten your arm.

3Relax your body, arm and fingers.

4Do not move your body or talk during measurement.

- Eng 10 -

- Eng 11 -

Image 6
Contents REF CH-311B General Remarks For proper measure of blood pressureGeneral Remarks Precaution for maintenance Precaution for USE and MaintenancePrecaution for use Precaution for USE and MaintenanceProtect the nature environment Nature and frequency of maintenanceIdentification of Parts Reference European standardClose the battery compartment cover HOW to Load BatteriesOpen the battery compartment Cover Place the batteries in the compartmentRemove the batteries HOW to Unload the BatteriesPoints for Accurate Measurement Measurement in sitting postureHOW to Wrap the ARM Cuff HOW to Wrap the ARM CuffUnroll the arm cuff Wrap the arm cuff tightly around your arm HOW to Measure Your Blood PressureTurn the Power On Sit in the recommended positionPress the exhaust button Power offPressurize the cuff Subsequent measurementError Indications About Blood PressureDisplay Mark CONDITION/CAUSE Corrective Action Before Asking for REPAIR/INSPECTION Specifications Additional Information