Citizen Systems CH-311B HOW to Measure Your Blood Pressure, Wrap the arm cuff tightly around your arm

Page 8

HOW TO MEASURE YOUR BLOOD PRESSURE

1 Wrap the arm cuff tightly around your arm.

( See page 12 "HOW TO WRAP THE ARM CUFF".)

2 Insert the air hose plug into
the case of the unit (Air Hose
socket).	Air Hose
	socket

3 Sit in the recommended position.

( See page 11 "POINTS FOR ACCURATE MEASUREMENTS".)

4 Measure your blood pressure.

4.1 Turn the Power On

Grip the pumping bulb.

(* Do not bend or pull the pumping bulb.)

Press the "POWER" switch for Power on.

All display mark appear for approx. 1 second.

HOW TO MEASURE YOUR BLOOD PRESSURE

After all display marks are disappeared, the last measured systolic / diastolic blood pressure values and pulse rate are displayed.

Memory function works on for approximately 2 second or during depressed the "POWER" switch.

After memorized blood pressure value is disappeared, deflation mark "▼" appears.

If there is some air remaining in the cuff, release air with the exhaust button until the "0" appears.

The unit is now ready to take new measurement.

English

- Eng 14 -

- Eng 15 -

Image 8

Contents REF CH-311B General Remarks General RemarksFor proper measure of blood pressure Precaution for USE and Maintenance Precaution for usePrecaution for maintenance Precaution for USE and MaintenanceNature and frequency of maintenance Identification of PartsProtect the nature environment Reference European standardHOW to Load Batteries Open the battery compartment CoverClose the battery compartment cover Place the batteries in the compartmentHOW to Unload the Batteries Points for Accurate MeasurementRemove the batteries Measurement in sitting postureUnroll the arm cuff HOW to Wrap the ARM CuffHOW to Wrap the ARM Cuff HOW to Measure Your Blood Pressure Turn the Power OnWrap the arm cuff tightly around your arm Sit in the recommended positionPower off Pressurize the cuffPress the exhaust button Subsequent measurementDisplay Mark CONDITION/CAUSE Corrective Action Error IndicationsAbout Blood Pressure Before Asking for REPAIR/INSPECTION Specifications Additional Information