Citizen Systems CH-456 Automatic Power OFF Feature, English, Deutsch, Italiano, Français

Page 10

MEASURING YOUR BLOOD PRESSURE

5The measurement results are displayed.

MEASURING YOUR BLOOD PRESSURE

The Body Movement Indicator is displayed on the

measurement results display if you move your hand or

Irregular Heartbeat (IHB) Indicator

( See page 19)

Body Movement Indicator

( See page 19)

• Once measurement is complete, the cuff deflates and the measurement results (systolic/diastolic blood pressure values, pulse) are displayed.

* Provided there is no error in the measurement results, they are stored automatically.

arm during measurement, causing a substantial pressure

English

change to be detected.

If the Body Movement Indicator is displayed, measure your blood pressure again.

If an irregular heartbeat is detected during measurement,

Español

the Irregular Heartbeat (IHB) Indicator is displayed after

measurement is completed.

An irregular heart beat is defined as a heart beat that

varies by ±25% from the middle of 5 heart beat intervals

Português

during the blood pressure measurement.

• Measurement may not be correct if your heartbeat fluctuates

greatly during measurement. If the Irregular Heartbeat (IHB)

Indicator is displayed, measure your blood pressure again.

 

English Español Português

Italiano Français 中文

6Finishing measurement.

• Press the “START/STOP” switch to turn the monitor off.

START/STOP Switch

[Manual pressurization]

• If your systolic blood pressure is expected to exceed 200mmHg, use Manual Pressurization when taking a measurement.

• Keep “START/STOP” switch held pressed until

 

the pressure value you want to stop pressurization

 

is reached (approximately 40mmHg higher

 

than the Systolic blood pressure). You can stop

START/STOP Switch

pressurization by the unit by releasing the switch at the

 

aforementioned value is reached.

 

The upper pressure limit is 280mmHg

 

 

 

 

 

 

 

 

Caution

If the Irregular Heartbeat (IHB) Indicator appears

 

 

 

 

frequently, you are advised to consult a doctor

 

 

Deutsch

 

 

about your health condition.

 

 

 

 

 

 

 

 

 

 

 

 

AUTOMATIC POWER OFF FEATURE

 

Italiano

 

 

• After taking the blood pressure measurement, pressing the “START/STOP” switch

 

 

will turn the monitor off. However, if you do not press the switch, the monitor’s

 

 

 

Auto OFF function will automatically turn the monitor off after 3 minutes.

 

 

 

 

 

 

 

Français

 

 

 

 

 

中文

- Eng 18 -

- Eng 19 -

Image 10
Contents REF CH-456 中文 Français Italiano Deutsch Português Español EnglishContents General RemarksMeasure your blood pressure at the same time each day Precautions for useRemarks Maintenance Precautions Symbols ExplanationEnglish Español Português Italiano Français 中文 Identification of PartsComponent names Cuff Main UnitLoading the Batteries Open the cover of battery compartmentClose the battery cover Removing the BatteriesUsing AC Adapter Option Time AdjustmentPress the Adjust switch to adjust the time format Press the Adjust switch to adjust the hourPress the Adjust switch to adjust the minutes Measuring Your Blood PressurePlace the cuff at the height of the heart Deutsch Automatic Power OFF FeatureEnglish ItalianoMeasurement in a reclining posture Press the Memory switch onceTaking measurements while sitting You may use your right arm to measure your blood pressureKEY to Display Icons HOW to Delete the DataPortuguês Español Português About Blood PressureBlood Pressure Q&A EspañolSpecifications Before Requesting Repairs or TestingUnit and change them Design and Specification are subject to change without notice