English Español Português
Italiano Français 中文
MEASURING YOUR BLOOD PRESSURE
4 Pull the end of the cuff outwards so that the cuff is snug around your arm and then secure the end to the
5 Place your arm on a table or the like, so that the center of the cuff comes to the height of your heart.
* Carefully place the cuff on your arm, taking care to use the correct tightness. The tightness is correct if you can readily slide a finger between the cuff and your arm.
6 Relax your arm and lightly open your hand, with the palm upward.
MEASURING YOUR BLOOD PRESSURE
2 Plug the air hose connector into the main unit.
• Plug the air hose connector firmly into the air hose socket on the main unit, as illustrated.
Air hose connector Air hose socket
3Place the cuff at the height of the heart.
( 
See page 20)
4Press the START/STOP switch (the blue switch).
•All digits displayed is an initial display, indicating that the monitor is functioning normal.
•The cuff is pressurized automatically.
*If the unit judges that pressurization is insufficient, it automatically repressurizes.
*
is displayed when a pulse is detected.
*When you want to stop measurement, press the “START/STOP” switch. The cuff is deflated and measurement stops.
*If the pressurization value exceeds 280mmHg, if pressurization feels abnormal, or if you want to stop the measurement process, press the START/STOP switch again. The cuff deflates, and the power turns off.
中文 Français Italiano Deutsch Português Español English
- Eng 16 - | - Eng 17 - |