CLEANING AND CARE
Cleaning and care
1Switch off the appliance and unplug it if you are running it from the mains.
2Remove the adjustable combing system and clean the blade head A with the brush supplied.
3 Remove the cutting head A by pressing on the top of the cutting head until it springs out the holder.
4 Replace the cutting head A by inserting the catch at the bottom of the cutting head in the opening in the housing and press down firmly.
5Replace the adjustable combing system.
Notes
7Never use water or any other liquids to clean the appliance. Only use the cleaning brush provided.
7You can rinse the cutting head and the two extendable combs with water, but you must remove them from the device first.
7Remove any clippings after each use.
7The cutting head of your appliance does not normally need to be oiled. If you want to maintain the original condition of the cutting head for as long as possible, it is worth oiling it at regular intervals (with the oil provided).
Storage
If you do not want to use the appliance for a long period of time, please store it carefully.
1Make sure the appliance is switched off.
2Store the parts in the original packaging in a cool, dry place.
3Make sure the appliance is kept out of reach of children.
12 ENGLISH