Grundig MC 4840 manual Beard trimming, Trimming contours

USE --------------------------------------------------------------------------------------------------------------------------------------------------

Beard trimming

1Set the trimming length.

2 Press the button D to switch on the appliance.

Note

7If the appliance is blocked by thick hair while you are using it, turn it off. If running it from the mains, unplug the socket. Remove the combing system and clean the cutting head with the brush supplied. If the blades only move slowly or not at all, clean the appliance as described in the next section.

Trimming contours

For trimming contours, remove the adjustable combing system C (cutting length without combing system 1.5 mm).

1 Press the button D to switch on the appliance.

ENGLISH 11