Note: The reservoir tube, shown in the illustration earlier in this manual, acts as a holding tank for the mist, reducing the amount lost during treatment. Its use is optional. If you wish to use the reservoir tube, install it now on the small end of the T adapter.
8.Install T adapter onto top of nebulizer medication cup cap.
9.Connect the tubing to the adapter on the bottom of the nebulizer medication cup.
10.Connect the tubing's other end to the compressor air outlet connector.
T adapter
cup
install
Tadapter on cap
WARNING: Before use, check that all parts are securely connected. Use of an improperly assembled nebulizer could diminish or prevent adequate delivery of medication and the effectiveness of the treatment.
OPERATION
sCaution: The
1.Ensure that the ON/OFF switch is in the OFF position.
2.Plug the power cord into a properly grounded electrical wall outlet.
3.Move the ON/OFF switch to the ON position to start the compressor.
4.Place the nebulizer mouthpiece between teeth and close mouth (or install the mask on face).
5.As aerosol starts flowing, inhale deeply and slowly through mouthpiece (or mask).
WARNING: Never use a nebulizer with a clogged nozzle. If the nozzle is clogged, the aerosol mist will be reduced, altered or stopped, which will diminish or eliminate the ef- fectiveness of the treatment. If clogging occurs, replace the nebulizer.