Panasonic CS-E24NKUA, CU-E18NKUA, CU-E24NKUA, CS-E18NKUA manual Indoor Unit

Page 6

INDOOR UNIT

CAUTION

•Switch off the power at the circuit breaker before cleaning.

•Do not touch the aluminium fin, sharp parts may cause injury.

CLEANING INSTRUCTIONS

Do not use benzene, thinner or scouring powder.

Use only soap ( pH7) or neutral household detergent.

Do not use water hotter than 104°F.

2

4

HINT

To ensure optimal performance of the unit, cleaning maintenance has to be carried out at regular intervals. Dirty unit may cause malfunction and you may see error code “H99”. Please consult authorized dealer.

1

7

9 8

3

5

6

1 INDOOR UNIT

 

7 AUTO OFF/ON BUTTON

 

 

 

• Wipe the unit gently with a soft, dry cloth.

 

• Use when remote control is misplaced or a malfunction occurs.

2FRONT PANEL

Remove Front Panel

Raise and pull to remove the front panel.

Wash gently and dry.

Close Front Panel

• Press down both ends of the front panel to close it securely.

Step

Action

Mode

1

Press once.

Automatic

2

Press and hold until you hear one

Force cooling

beep, then release.

 

 

3

Repeat step 2. Press and hold

Normal cooling

until you hear two beeps, then

 

release.

 

4

Repeat step 3. Press and hold

Force heating

until you hear three beeps, then

 

release.

 

Press the button to turn off.

6

3REMOTE CONTROL RECEIVER

4ALUMINIUM FIN

5HORIZONTAL AIRFLOW DIRECTION LOUVER

Do not adjust by hand.

6VERTICAL AIRFLOW DIRECTION LOUVER

Do not adjust by hand.

8AIR PURIFYING FILTER

Vacuum the air purifying filter.

It is recommended to clean the filter every 6 months.

Replace the filter every 3 years or replace any damaged filter. Part no.: CZ-SA20P

9 AIR FILTERS

Air filter cleaning is required every two weeks.

Wash/rinse the filters gently with water to avoid damage to the filter surface.

Dry the filters thoroughly under shade, away from fire or direct sunlight.

Replace any damaged filters.

Image 6
Contents English Quick GuideModel No Indoor Unit Outdoor Unit F568726Operation Condition Safety PrecautionsPower Supply Indoor Unit and Outdoor UnitRemote Control Remote Control To Reach Temperature To SET the TimerQuickly Indoor Unit Symptom TroubleshootingFollowing symptoms do not indicate malfunction Unit stops and the Timer indicator blinksFor Seasonal Inspection After Extended NON-USE NON Serviceable CriteriasInformation For Extended NON-USEMemo Memo Memo OFF/ON Quick GuideMode Temp