Panasonic CU-E24NKUA, CU-E18NKUA, CS-E24NKUA manual To Reach Temperature, Quickly, To SET the Timer

Page 5

7

TO REACH TEMPERATURE

QUICKLY

 

• This operation stops automatically after 20 minutes.

 

Press and hold for 5 seconds to dim or restore the

TO SET THE TIMER

• To turn ON or OFF the unit at a preset time.

8

unit’s indicator brightness.

 

 

 

9

Press and hold for approximately 10 seconds to

show temperature setting in °C or °F.

 

10

Press and hold for approximately 5 seconds to show

12-hour (am/pm) or 24-hour time indication.

ON

1

OFF

Select ON or

OFF timer

2

Set the time

SET

Confirm

11 Press to restore the remote control’s default setting.

12 Not used in normal operations.

NOTES

QUIET POWERFUL

,

Can be activated in all modes and can be cancelled by pressing the respective button again.

QUIET POWERFUL

,

• Cannot be selected at the same time.

• To cancel ON or OFF timer, press

ON

or OFF then

press CANCEL.

When ON Timer is set, the unit may start earlier (up to 35 minutes) before the actual set time in order to achieve the desired temperature on time.

Timer operation is based on the clock set in the remote control and repeats daily once set. For clock setting, please refer to Remote Control Preparation on the back cover.

If timer is cancelled manually or due to power failure, you can restore the previous setting (once power is resumed) by pressing SET .

5

Image 5
Contents Model No Indoor Unit Outdoor Unit Quick GuideEnglish F568726Power Supply Safety PrecautionsOperation Condition Indoor Unit and Outdoor UnitRemote Control Remote Control Quickly To Reach TemperatureTo SET the Timer Indoor Unit Following symptoms do not indicate malfunction TroubleshootingSymptom Unit stops and the Timer indicator blinksInformation NON Serviceable CriteriasFor Seasonal Inspection After Extended NON-USE For Extended NON-USEMemo Memo Memo Mode Quick GuideOFF/ON Temp