Cisco Systems 3180 installation instructions Establishing a Serial Console Connection

Page 14

Chapter 3 Installing the AVS 3180

Establishing a Serial Console Connection

Establishing a Serial Console Connection

Before you can configure the AVS 3180 by using the command line interface (CLI), you must establish

aserial console connection to it. This requires a PC, two DB-9 to RJ-45 adapters (provided), an RJ-45 180/rollover cable (provided), and terminal emulation communication software (Hyper Terminal or equivalent). You may also use a serial concentrator connection, if desired.

To establish a serial console connection, follow these steps:

1.Connect a console to the serial console port on the rear panel:

a.Attach a DB-9 or DB-25 to RJ-45 adapter to the serial port of the console.

b.Attach a DB-9 to RJ-45 adapter to the serial port of the AVS 3180. For the location of the serial port, see Figure 3-10.

c.Use the RJ-45 180/rollover cable to connect the console to the AVS 3180.

2.If you have not already done so, power up the AVS 3180 as described in the “Booting the AVS 3180” section on page 3-13.

3.Open your terminal emulation application on your PC to access the AVS 3180 CLI. The following procedure uses HyperTerminal for Windows:

a.Launch HyperTerminal. The Connection Description window appears.

b.Enter a name for your session in the Name field.

c.Click OK. The Connect To window appears.

d.From the drop-down list, choose the COM port to which the device is connected.

e.Click OK. The Port Properties window appears.

f.Set the port properties: Baud Rate = 9600 Data Bits = 8

Flow Control = none Parity = none

Stop Bits = 1

g.Click OK to connect.

h.Press Enter to display the CLI prompt.

4.After you create a session, choose Save As from the File menu to save the connection description. Saving the connection description has the following two advantages:

–The next time you launch HyperTerminal, the session is listed as an option under

Start > Programs > Accessories > HyperTerminal > Name_of_session. This option lets you reach the CLI prompt directly without repeating the configuration steps.

–You can connect your cable to a different device without configuring a new HyperTerminal session. If you use this option, ensure that you connect to the same port on the new device as was configured in the saved HyperTerminal session. Otherwise, a blank screen appears without a prompt.

For information about using the CLI to configure the AVS 3180, refer to the following section, “Configuring Network Settings” and the Cisco Application Velocity System User Guide.

Cisco AVS 3180 Management Station Hardware Installation Guide

3-14

78-17292-01

 

 

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Installing the AVS If the Product is Damaged Installing Your AVSUnpacking and Inspecting the AVS Installing the AVS 3180 in a Four-Post Rack Attaching the Telescopic Rails to the Rack Assembly Removing the Inner Server Rail Attaching Front Rail to the Right Side of the Rack Telescopic Rail Adjustment Screws Attaching Back Rail to the Right Side of the Rack Attaching a Two-Post Rack Bracket to the AVS Inserting the AVS 3180 into the RackInstalling the AVS 3180 on a Workbench or Tabletop Attaching the Right Bracket to the Right Side of the AVSConnecting Cables 10 AVS 3180 Back Panel Ports and ConnectorsConnecting AC Power 11 Console ConnectionBooting the AVS Booting with a Console ConnectedEstablishing a Serial Console Connection Configuring Network Settings Velocityshow interfaceYou can view the DNS settings by using the show dns command Setting the Time Indicator Color State Indicates Checking the Front Panel LEDsRemoving or Replacing an AVS

3180 specifications

Cisco Systems 3180 is a prominent network switch designed primarily for enterprise environments that demand high performance and reliability. A part of Cisco’s Catalyst series, the 3180 combines advanced technology with robust features to deliver exceptional connectivity and management capabilities.

One of the key features of the Cisco 3180 is its ability to support both Layer 2 and Layer 3 switching. This versatility allows organizations to benefit from enhanced routing capabilities, enabling seamless communication between different network segments. The switch supports a high throughput with a robust architecture that accommodates various networking demands, making it an ideal choice for businesses that require scalability.

Security is a top priority in today's networking world, and the Cisco 3180 excels in this area. It includes advanced security protocols that help safeguard network data and prevent unauthorized access. Features like Virtual LANs (VLANs) enhance network segmentation, while access control lists (ACLs) regulate traffic flow based on specified criteria. The switch also supports the 802.1X authentication protocol, ensuring that only authorized devices can connect to the network.

The Cisco 3180 leverages Gigabit Ethernet technology, providing high-speed connectivity for multiple devices within the network. This technology supports a wide range of applications, from data-intensive tasks to real-time communications. Moreover, the switch is designed to minimize latency, ensuring quick and efficient data transmission.

For network management, the Cisco 3180 offers features such as Cisco’s Embedded Event Manager (EEM) and Cisco Prime, which provide tools for monitoring and managing network performance. These tools allow network administrators to address issues proactively, optimize resources, and maintain overall network health.

The switch is also designed with energy efficiency in mind, incorporating technologies that reduce power consumption while maintaining performance. Support for Energy Efficient Ethernet (EEE) ensures that power is used judiciously, aligning with modern sustainability initiatives.

In conclusion, the Cisco Systems 3180 is a feature-rich network switch that combines high performance, security, and efficiency. Its advanced capabilities make it a vital component for enterprises looking to enhance their networking infrastructure while preparing for future growth and technological advancements. With robust management tools and security features, the Cisco 3180 stands out as a reliable solution for modern networking challenges.
Top Page Image Contents