Cisco Systems installation instructions Installing the AVS 3180 in a Four-Post Rack

Page 3

Chapter 3 Installing the AVS 3180

Installing Your AVS 3180

Warning To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to ensure that the system remains stable. The following guidelines are provided to ensure your safety:

•This unit should be mounted at the bottom of the rack if it is the only unit in the rack.

•When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the heaviest component at the bottom of the rack.

•If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit in the rack. Statement 1006

This section contains the following procedures:

•Installing the AVS 3180 in a Four-Post Rack

•Attaching a Two-Post Rack Bracket to the AVS 3180

•Installing the AVS 3180 on a Workbench or Tabletop

Installing the AVS 3180 in a Four-Post Rack

This section provides instructions for installing the AVS 3180 in a four-post rack. The rack must be properly secured to the floor, ceiling, or upper wall, and where applicable, to adjacent racks. The rack should be secured using floor and wall fasteners and bracing as specified by industry standards.

Before installing the AVS 3180 in a rack, be sure you have read Chapter 2, “Preparing for Installation,” to familiarize yourself with the proper site and environmental conditions. Failure to read and follow these guidelines may lead to an unsuccessful installation and possible damage to the AVS 3180 and its components. Perform the steps below when installing and servicing the AVS 3180.

When installing and servicing the AVS 3180:

•Disconnect all power and external cables before installing the AVS 3180.

•Install the AVS 3180 in compliance with your local and national electrical codes:

–United States: National Fire Protection Association (NFPA) 70; United States National Electrical Code.

–Canada: Canadian Electrical Code, Part, I, CSA C22.1.

–Other countries: If local and national electrical codes are not available, see IEC 364, Part 1 through Part 7.

•Do not work alone under potentially hazardous conditions.

•Do not perform any action that creates a potential hazard to people or makes the equipment unsafe.

•Do not attempt to install the AVS 3180 in a rack that has not been securely anchored in place. Damage to the AVS 3180 and personal injury may result.

•Due to the size and weight of the AVS 3180, never attempt to install it by yourself.

Refer to Chapter 2, “Preparing for Installation,” and the “Precautions for Rack-Mounting” section on page 2-9for additional safety information on rack installation.

Cisco AVS 3180 Management Station Hardware Installation Guide

 

78-17292-01

3-3

 

 

 

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Installing the AVS Installing Your AVS Unpacking and Inspecting the AVSIf the Product is Damaged Installing the AVS 3180 in a Four-Post Rack Attaching the Telescopic Rails to the Rack Assembly Removing the Inner Server Rail Attaching Front Rail to the Right Side of the Rack Telescopic Rail Adjustment Screws Attaching Back Rail to the Right Side of the Rack Inserting the AVS 3180 into the Rack Attaching a Two-Post Rack Bracket to the AVSAttaching the Right Bracket to the Right Side of the AVS Installing the AVS 3180 on a Workbench or Tabletop10 AVS 3180 Back Panel Ports and Connectors Connecting Cables11 Console Connection Connecting AC PowerBooting with a Console Connected Booting the AVSEstablishing a Serial Console Connection Velocityshow interface Configuring Network SettingsYou can view the DNS settings by using the show dns command Setting the Time Checking the Front Panel LEDs Indicator Color State IndicatesRemoving or Replacing an AVS

3180 specifications

Cisco Systems 3180 is a prominent network switch designed primarily for enterprise environments that demand high performance and reliability. A part of Cisco’s Catalyst series, the 3180 combines advanced technology with robust features to deliver exceptional connectivity and management capabilities.

One of the key features of the Cisco 3180 is its ability to support both Layer 2 and Layer 3 switching. This versatility allows organizations to benefit from enhanced routing capabilities, enabling seamless communication between different network segments. The switch supports a high throughput with a robust architecture that accommodates various networking demands, making it an ideal choice for businesses that require scalability.

Security is a top priority in today's networking world, and the Cisco 3180 excels in this area. It includes advanced security protocols that help safeguard network data and prevent unauthorized access. Features like Virtual LANs (VLANs) enhance network segmentation, while access control lists (ACLs) regulate traffic flow based on specified criteria. The switch also supports the 802.1X authentication protocol, ensuring that only authorized devices can connect to the network.

The Cisco 3180 leverages Gigabit Ethernet technology, providing high-speed connectivity for multiple devices within the network. This technology supports a wide range of applications, from data-intensive tasks to real-time communications. Moreover, the switch is designed to minimize latency, ensuring quick and efficient data transmission.

For network management, the Cisco 3180 offers features such as Cisco’s Embedded Event Manager (EEM) and Cisco Prime, which provide tools for monitoring and managing network performance. These tools allow network administrators to address issues proactively, optimize resources, and maintain overall network health.

The switch is also designed with energy efficiency in mind, incorporating technologies that reduce power consumption while maintaining performance. Support for Energy Efficient Ethernet (EEE) ensures that power is used judiciously, aligning with modern sustainability initiatives.

In conclusion, the Cisco Systems 3180 is a feature-rich network switch that combines high performance, security, and efficiency. Its advanced capabilities make it a vital component for enterprises looking to enhance their networking infrastructure while preparing for future growth and technological advancements. With robust management tools and security features, the Cisco 3180 stands out as a reliable solution for modern networking challenges.
Top Page Image Contents