Razor E500S owner manual Before YOU Begin, Estimated Assembly and Set-Up Time, Required Tools

BEFORE YOU BEGIN

Remove contents from box. Remove the foam separators that protect the components from damage during shipping. Inspect the contents of the box for scratches in the paint, dents or kinked cables that may have occurred during shipping. Because the E500S scooter was 95 percent assembled and packed at the factory, there should not be any problems, even if the box has a few scars or dents.

Estimated Assembly and Set-Up Time

Razor recommends assembly by an adult with experience in bicycle mechanics. Allow up to 20 minutes for assembly, not including initial charge time.

Allow up to 12 hours for initial charge (see page 3 for charging information).

Front Brake Lever	Rear Brake Lever
Speed Control	Brake Lever
	Adjuster

Front Fork	Wheel
	Tire

Charger	Stem
	Collar
	Collar Bolts

WARNING:

DO NOT USE NON-RAZOR PRODUCTS WITH YOUR RAZOR E500S SCOOTER. The scooter has been built to certain Razor design specifications. The original equipment supplied at the time of sale was selected on the basis of its compatibility with the frame, fork and all other parts. Certain aftermarket products may or may not be compatible.

Charger

Plug

Charger

Port

	On/Off Switch
Kick	Charger Port
Stand

Required Tools

Some tools may be supplied; however, we recommend the use of mechanic’s grade tools. Use the supplied tools only as a last resort.

5 mm	10/15 mm wrench	Bicycle-style tire pump for
hexagonal key wrench	(included)	Schrader valve tires, with
(included)		pressure gauge

Need Help? Visit our web site for updates and a list of authorized service centers at www.razor.com or call toll-free at 866-467-2967Monday - Friday 8:00 AM - 5:00 PM Pacific Time.

2