Razor EN_130402 owner manual BeforeYou Begin, Required Tools For Assembly, Proper Riding Attire

Page 3

Safety Warnings

PROPER RIDING ATTIRE

Always ensure rider is wearing proper protective equipment, such as an approved safety helmet. A helmet may be legally required by local law or regulation in your area. Always wear shoes and keep shoelaces tied and out of the way of the wheels. Never ride barefoot or in sandals.

FAILURE TO USE COMMON SENSE AND HEED THE ABOVE WARNINGS FURTHER INCREASES RISK OF SERIOUS INJURY. USE AT YOUR OWN RISK AND WITH APPROPRIATE AND SERIOUS ATTENTION TO SAFE OPERATION. USE CAUTION.

WARNING: ALWAYS INSPECT SCOOTER PRIOR TO RIDING. Properly inspecting and maintaining your scooter can reduce the risk of injury. Always inspect your scooter before riding and regularly maintain it.

WARNING: CHECK LOCAL LAWS REGARDING SCOOTER USE. Check local laws and regulations to see where and how you may use your Razor scooter legally. In many states and local areas scooter riders are required BY LAW to wear a helmet. Check local laws and regulations regarding laws governing helmet use and scooter operation in your area.

BeforeYou Begin

Remove the contents from box. Inspect the contents of the box for scratches in the paint and/or dents that may have occurred during shipping. Because your scooter was partially assembled and packed at the factory, there should not be any problems, even if the box has a few scars or dents.

WARNING: DO NOT USE NON-RAZOR PRODUCTS WITH YOUR SCOOTER.

Grips

Collar Clamp

Riser

Handlebar

Down Tube

Rear Fender/Brake

The RDS has been built to certain Razor design specifications. The original equipment supplied at the time of sale was selected on the basis of its compatibility with the frame, fork and all other parts. Certain aftermarket products may not be compatible and will void your warranty.

PRODUCT I.D. CODE

1.Side of deck

2.UPC Side of Box

Front Fork

Deck

 

qRequired Tools For Assembly

5 mm Allen wrench

(Included)

2

Image 3
Contents EN130402 Safety Warnings ContentsProduct I.D. Code Required Tools For AssemblyBeforeYou Begin Proper Riding AttireTools Required 5 mm Allen Wrench Assembly instructionsAttaching the Handlebar Inflating TiresReplacing the Wheels Repair and MaintenanceDiagram at right. Tighten bolts Tire Replacing the Tires/TubesCollar Clamp CleaningYour ScooterHow to Ride Check before ridingPage Safety reminders WarrantyCustomer Service Info