Pride Mobility Quantum 6000Z, Q6 Edge manual Proper Pelvic Belt Placement

Page 12

12

Informational Supplement

„Some power chair components, like armrests and wheels, can interfere with proper belt fit. It may be necessary to insert the belt between the armrest and the seatback or through openings between the backrest and seat in order to avoid placing the pelvic belt over the armrest. See figure 8.

Belt restraints must

not be held away from

the body by power chair

components

such as

armrests

or wheels.

Figure 8. Proper Pelvic Belt Placement

„ Place the upper-torso belt across the middle of the shoulder and the center of the chest, and connect to the pelvic belt near the hip of the power chair occupant. See figure 9.

WARNING! The

upper-torso belt webbing should not be worn twisted in a manner that reduces the area of contact of the belt with the occupant.

Figure 9. Upper-torso Belt

Placement

Transit Securement System

www.pridemobility.com

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Transit Securement System Table of Contents Introduction Labeling User Safety Information DefinitionsProtocols and Procedures Securing the Power Chair See figureSecurement Points on a Quantum 6000Z Securement Points on a Quantum Wtors Recommended Clear Zones for Power Chair-seated Occupants Proper Pelvic Belt Placement Power Chair-anchored Belt Restraint Power Chair Belt Restraint Anchor Transit Securement System Important Points to Remember Informational Supplement Pride Occupied Transit Securement System Declarations Appendix Declarations INFMANU3658
Top Page Image Contents