Buzzaround Lite™ Owner’s Manual – Models GB106 and GB106XR | Updated 07/08 |
DIAGNOSTICS SYSTEM
Any fault condition on the controller or scooter will cause the “Power on/diagnostics” LED to flash. The LED light located on the faceplate of the scooter will tell you about the problem in how it flashes.
LED Flashes 1 time pause, 1 time, and pause. Batteries are low scooter still operates.
LED Flashes 2 times, pause, 2 times, pause. Batteries are very low, scooter will not drive.
LED Flashes 3 times, pause, 3 times, pause. Over voltage to controller.
LED Flashes 5 times, pause, 5 times, pause. Brake in freewheel or brake connection problem.
LED Flashes 6 times, pause, 6 times, pause. Paddle or speed potentiometer problem.
LED Flashes 7 times, pause, 7 times, pause. Paddle or speed potentiometer problem.
LED Flashes 8 times, pause, 8 times, pause. Motor disconnected or faulty.
LED Flashes 9 times, pause, 9 times, pause. Controller fault.
WARNING: DO NOT OPERATE THE SCOOTER IF THE BATTERY IS NEARLY DISCHARGED. FAILURE TO COMPLY WITH THIS CONDITION MAY LEAVE THE USER STRANDED IN AN UNSAFE POSITION.
This is the “LED” light that will flash in the event of a problem.
Page 21