Golden Technologies GB106XR owner manual Wheels and Tires, How to change a tire assembly

Page 24

Buzzaround Lite™ Owner’s Manual – Models GB106 and GB106XR

Updated 07/08

GENERAL CARE AND MAINTENANCE

Wheels and Tires

Your Buzzaround Lite™ scooter is equipped with “split-rim” wheels and foam- filled tires.

Front Tire	Rear Tire
Solid/Foam-filled	Solid/Foam-filled

How to change a tire assembly:

1.Remove the center nut.

2.Remove the tire assembly from the scooter

3.Install a new tire assembly onto the axle.

4.Install and tighten the center nut.

NOTE: All tires on your Buzzaround Lite are foam-filled. This means that there is NO air in any tire. The tires are filled with foam. This means you will never have a flat tire even if you puncture the tire.

IF YOUR BUZZAROUND LITE DOES NOT OPERATE

•Make certain that the brake handle is set to the engaged (forward) position.

•Check the main circuit breaker. If necessary, reset the circuit breaker.

•Make certain that the speed adjustment dial is at the desired setting.

•Be sure that the key is all the way in the key receptacle and the scooter is “ON” (note the green “LED” light is illuminated)

WARNING - ONLY START DRIVING IF EVERYTHING IS IN WORKING ORDER! HAVE ANY AND ALL DEFECTS REPAIRED IMMEDIATELY!

IF NONE OF THE ABOVE PROCEDURES SOLVE THE PROBLEM, CONTACT

YOUR AUTHORIZED GOLDEN TECHNOLOGIES DEALER.

LUBRICATION All of the bearings on your Golden Technologies Buzzaround Lite are permanently lubricated and sealed. No lubrication is required.

Page 24

Image 24

Contents GB-106 and GB-106XR Buzzaround Lite Disclaimer Contents Introduction Before Getting on Your Buzzaround Lite Safety Driving Your Buzzaround Lite on AN InclineDriving Down AN Incline Rules for USE and Other Safety Considerations Medication Safety EMI / RFI EMI / RFI and Your Buzzaround LiteEMI / RFI Recommendations Scooter Information Buzzaround LiteFor Your Records Key Switch GB-106 Buzzaround Lite OperationHand Controls Operation DC Battery Voltage Meter Tiller AdjustmentArmrest Width Adjustment Seat Height AdjustmentOperation Seat Rotation LeverFlip-Up Armrests SeatingRiding Your Buzzaround Lite MountingTo Get On Your Buzzaround Lite Basic DrivingRiding Your Buzzaround Lite SteeringSteering in a tight spot Steering in ReverseControl through tight spots DoorsIf the door opens away from you If the door opens towards youWhen proceeding up any ramp, curb, or incline If you must stop your scooter while driving up a rampDriving down a ramp Grass and GravelDiagnostics System General Care and Maintenance Main Circuit BreakerPossible causes for the main circuit breaker to trip How to change a tire assembly Wheels and TiresIf Your Buzzaround Lite does not Operate Battery Charging Information Battery Maintenance Cleaning Your Buzzaround Lite TiresBody SeatCare and Maintenance of Your Buzzaround Lite To Charge the Battery PackTroubleshooting Tips Charger and BatteriesDisassembling and Transporting Your Buzzaround Lite Disassembly of Your Buzzaround LiteTighten the knob fully before lifting Assembly of Your Buzzaround Lite Pinching and crushing hazardAssembling Your GB-106 Buzzaround Lite Assembling Your Buzzaround Lite Installing the Seat Accident hazard due to non-engaged seatTransporting Your GB-106 Buzzaround Lite To Transport your Buzzaround LiteBuzzaround Lite Specifications Scooters One-Year Limited Warranty Scooter Warranty Card Please mail this document toGolden Technologies GB106 GB106 XR Buzzaround Lite