Buzzaround Lite™ Owner’s Manual – Models GB106 and GB106XR | Updated 07/08 |
ASSEMBLY OF YOUR BUZZAROUND LITE™
WARNING: DO NOT SIT ON OR OPERATE YOUR SCOOTER UNLESS BATTERY BOX IS IN PLACE AND THE LOCKING MECHANISM IS ENGAGED.
WARNING: BE AWARE OF ANY POSSIBLE PINCH POINTS WHEN CONNECTING THE REAR FRAME TO THE FRONT FRAME. PLEASE NOTE WARNING LABLES AT PINCH POINTS WHEN ASSEMBLING.
Pinching and crushing hazard!
Increased hazards due to pinching or crushing result due to the component weight (such as batteries) during preparation for transport and maintenance work.
-Always carry out any work to be done with great care.
-Always try to get help from a second person, especially when stowing parts for transport.
Pinch Point : A pinch point is an area where you MUST consider your fingers to be sure your fingers DO NOT become pinched between two metal areas. The greatest chance of pinch points become possible during the assembly of the Buzzaround Lite™ scooter. See photo below to become knowledgeable with this area.
WARNING!!!
Be sure not to position a finger between
the metal frames! This can cause injury. Look very carefully before assembling!
Page 31